Sunday, September 27, 2009

Big tip tank 230 liters for Fouga

After talking with Christian Berard, in 1996 the French Air Force prohibited the use of the 230 liters tip tanks, baned them for installation on fougas because they found some cracks in the fiber glass at the root of the front tank attachment.
Thoses tanks had to be stripped of the paint every 18 month and inspected for cracks and maintened by inspection requirement before 1996 .
On a fouga in the French Air Force, one tank broke off from the front attachment and stayed up right at the tip of the wing holding by the rear attachment point ,making the flight very difficult. The aircraft landed safely.
Accident occurred Saturday, June 16, 2001 at La Crosse, WIAircraft:Fouga CM 170, registration: N301FM 2 dead .
If the word came around before it would not have happened.

Tuesday, September 22, 2009

Filter Le Bozec

Just for information that the main fuel filter cannot be cleaned because it is a paper filter.
Le Bozec at my knowledge do not make that filter any more.
I will have some made with 316 stainless and will be able to be cleaned forever.
It will take 12-14 weeks from now and no need to buy 2 for one aircraft since they can be cleaned.
They will cost around $400.00 each ( expensive because small quantities )
Let me know if you are interested.

Friday, September 11, 2009

Blade antenna on fouga


Some infos from a fellow fouga pilot owner for blade antenna installation


"If anyone wants to switch to the blade antenna for the Fouga, they have to get a new combiner to make them work right.

CI 120-3 single output combiner. Connects to existing coaxial cables leading to the antennas.

When you see ............, be sure to piss on his shoes. Have a good time.

Regards, "

Friday, September 4, 2009

Engine start problem

A fellow Fouga owner had a problem to start the right engine.
It was an intermitent problem and not a full and clear explanation and understanding of the trouble between me and him.
Finaly the symtom is after reaching 1000 rpm the engine is spooling down before reaching the 1200rpm for fuel injection and ignition ( marbore II engine )
The relai involve is the 12K for the right engine.
A jumper wire on the relai 12K was not making a good contact so it was the problem.
Thanks to Jim who was the mechanic resolving that problem.